At this time, colors made with the 224 deep base are on backorder with no estimated timetable on when they will be back. We apologize for the inconvenience.
SYSTEM 4: Complete Epoxy Floor Kit - Original Color Chips Solventborne 3-Car Garage
Use this complete system to create a great, high build, durable and chemical/UV-resistant garage epoxy kit:
System #4 (Solvent-based Kit)
900+ sq/ft kit
Note: The etch n’ clean is not included in this kit. You can use Etch n' Clean, but most users prefer to prepare the concrete with a concrete floor grinder or use muriatic Acid.
|
HOW TO ORDER:
|
|
You can now build and choose your own custom color chip blend. You can chose up to four colors.
(If you want only 3 colors, leave the default field "none" for the fourth color.)
To help you select your own custom color combinations, please use our Color Chip Blending Tool so you can get an idea of what the colors will look like together. (computer screens all vary in color so it will give you a basic representation of the color).
Basically it works like this: You first choose the size, then what colors you want using the dropdown menu. You pay per 1 lb. no mater what colors you choose it is always the same price.
Note: Only the Silver or Gold Metallics are available in the custom blend option. Also, The Neon Colored Chips are not offered in the microchip size.
|
BASECOAT OPTIONS & AVAILABLE CHIP COLORS
Quick Application Steps:
Etch the concrete with an acid wash or floor grinder (to open up the pores of the concrete). After you successfully sweep away/vacuum up the debris, apply the preprime 167 sealer in a thin coat to soak deep into the substrate (this will seal the floor to assist in adhesion), wait until you are able to walk on it again to apply your 224HS basecoat epoxy (thin with a little bit of xylene to make it easier to apply), sprinkle your chips on top of the wet epoxy. Then wait overnight to apply your urethane clearcoat.
In the end, you’ll have a coat that seals off the floor and gets a good bite to the concrete, a coat that offers a high build color coat, and a chemical resistant / uv resistant layer as your finish coat.
System #4 Application Instructions
Product Data Sheets for the system we install for color chip broadcast systems:
Preprime 167 Penetrating Sealer
Devran 224HS High Build Epoxy Basecoat
Color Chips Decorative Flakes
HPU 747 VOC - High Performance Urethane Clearcoat
Color Design Tool:
www.colorchipselector.com
Planning On Shipping Overnight, 2nd Day, or 3-Day select?
This solventborne kit cannot be expedited (shipped Next Day Air, 2nd Day Air, or 3-day Select) because it is considered a hazardous material and is no longer allowed on airplanes. |
