Armorcote 309 Floorshine Polymer Floor Finish - Coating - High Gloss - 1 Gallon

Armorcote 309 Floorshineä is the ultimate floor finish. A 25% solids, metal crosslinked, polymer finish will make your floors look wet even when they are dry.

Some of the benefits of using Floorshine are:

• superior protection 
• durability
• reparability 
• black mark & detergent resistant
• ultra high gloss 
• water resistant
• non buffable
• non scuffing
• self-leveling  
• use with or without sealer
• slip resistant (exceeds ASTM standard D2047-82)
• most suited to high traffic areas
• performs exceptionally well with either spray buffing or high speed buffing
• V.O.C. Compliant

Where to use:

epoxy floor finishes, vinyl & vinyl asbestos, asphalt tile, concrete, linoleum, urethane floor finishes, sealed terrazzo, rubber, composition tile, wood

Directions for use:

Apply a thin uniform coat of finish to floor with new rayon mop. Allow to dry approximately 30 minutes. We recommend applying 3 – 4 uniform coats in this manner. Never pour left over finish back into the container to avoid contamination.

Coverage: 2,000 - 2,500 sq. ft per gallon

For BEST results, after Floorshine is applied. The coating should only be cleaned with a Neutral PH cleaner. This will avoid hazing, and keep the cleaner from dissolving the wax finish.