Clear Top Coat Kits

Several Clearcoat options are available. Depending on the job, traffic, application etc. dictates which would be more suitable.

WBU-520 Waterborne Urethane Clearcoat comes standard with the "Classic" garage floor kits and is a great, safe, easy to use thin-mil sealer for your epoxy floor system whether it's on your garage floor or in your basement. It's non-flammable, high gloss, and easyto use. (1) .75-gal kit generally covers over 300 sq/ft. 

WBU-520 Waterborne Urethane Clear Topcoat kit (Kit equals .75 gallons)  Coverage: 300+ Square feet per kit. This is equal to a one-car garage. The clearcoat lays ontop of the basecoat epoxy so coverage can easily exceed 300 square feet per kit at times.
 
General Description: A high performance, two-component, clear waterborne gloss urethane coating for use as a hard, durable high performance architectural coating (HIPAC). Features easy application, low VOC, high flash point, lower odor than solvent-based epoxies and urethanes, and a hard, tough, stain-resistant finish. For use on interior garage floors or basement floors, not recommended for use on exterior sidewalks or driveways where constant exposure to direct sunlight is present.
 
CHARACTERISTICS
  • Seamless and very easy to clean
  • Abrasion and chemical resistant
  • No odor as typical of solvent based paint
  • Meets the most stringent, severe V.O.C. regulations
     
    Product Information for WBU 520 - Waterborne Urethane 
     

     / Product Data Sheet

 

HPU 747 - The High Performance Urethane Clearcoat is a clear two component polyester/aliphatic polyurethane floor sealer upgrade designed for maximum chemical resistance, abrasion resistance and uv-resistance. It is a flammable liquid and should only be used in a well-ventilated area, NEVER should it be used in a basement or confined space. It works great as a long lasting clearcoat for garages, auto service centers, and more.

The Original Color Chips High Performance Urethane (HPU) (.75 gallon kits or 1.5 gallon Kit) Coverage: 450 - 550 Square feet per kit or a two-car garage. Original Color Chips High Performance Urethane (HPU) is a clear two component polyester/aliphatic polyurethane floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering and UV stability. 

General Description: Recommended for auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, exterior tanks, indoor or outdoor service and chemical exposure areas or for a industrial-grade clearcoat for your epoxy floor finish. For use interior or exterior sidewalks or driveways where constant exposure to direct sunlight is present. This is a highly flammable liquid and the use of an organic vapor mask is recommended.
 
CHARACTERISTICS
 
  • Seamless and very easy to clean - high gloss
  • Excellent Abrasion and Excellent chemical resistance
  • Strong Odor / use in well-ventilated areas 
  • Outstanding resistance to U.V. in its category
 
Product Information
 

Norklad 100M - 100% solids Clear Epoxy Clearcoat (100-M and 100-UV) is a super thick, self-leveling epoxy is mostly used by flooring professionals because of it's extreme durability and mil thickness.  100% solids can be applied with a squeegee, or rolled to get your desired thickess. Applied at 100 sq/ft per gallon, Norklad 100 self-levels over full broadcast chip broadcasts or rough floors.(often seen on terrazzo floors with a glasslike surface). Once Norklad 100 is mixed with the converter it only has a 30 minute potlife, so it is best reservved for professionals or with confidence.  This product is best used in Basements or countertops or commerical settings..

WBU-520 Waterborne Urethane Clear Coat kit (250+ sq/ft) .75-gal

WBU-520 Waterborne Urethane Clear Coat kit (250+ sq/ft) .75-gal

WBU-520 Clear is a two component high-gloss aliphatic polyurethane water based floor sealer that exhibits excellent characteristics for abrasion... more info
NEW
Color Chips HPU 747 VOC High Performance Clear Urethane Kit .75 gal

Color Chips HPU 747 VOC High Performance Clear Urethane Kit .75 gal

  Color Chips HPU 747 VOC High Performance Clear Urethane Kit is a clear two component polyester/aliphatic polyurethane floor sealer that... more info
NEW
Color Chips HPU 747 VOC High Performance Clear Urethane Kit 1.5 gal

Color Chips HPU 747 VOC High Performance Clear Urethane Kit 1.5 gal

  Color Chips HPU 747 VOC High Performance Clear Urethane Kit 1.5 Gallon is a clear two component polyester/aliphatic polyurethane floor sealer... more info
NEW
Norklad 100-M / 100% Solids CLEAR epoxy (150+ sq/ft)

Norklad 100-M / 100% Solids CLEAR epoxy (150+ sq/ft)

1.5 Gallon Kit /  or 100-150 square feet of coverage These smaller kits are ideal for restrooms, foyers, enclosed trailers, and office areas.... more info
NEW
Norklad 100-M / 100% Solids CLEAR epoxy (350+ sq/ft)

Norklad 100-M / 100% Solids CLEAR epoxy (350+ sq/ft)

3-Gallon Kit Norklad 100-M is a two component 100% solids epoxy broadcast coat that can be filled with decorative chips and colored sand... more info
NEW
Norklad 100-M / 100% Solids CLEAR Epoxy (1,500+ sq/ft)

Norklad 100-M / 100% Solids CLEAR Epoxy (1,500+ sq/ft)

15-Gallon Kit Norklad 100-M is a two component 100% solids epoxy broadcast coat that can be filled with decorative chips and colored sand mixtures to... more info
HOT
Norklad 100UV / 100% Solids UV-CLEAR Epoxy (350+ sq/ft)

Norklad 100UV / 100% Solids UV-CLEAR Epoxy (350+ sq/ft)

Norklad 100 UV is a two component 100% solids epoxy seal coat with added UV resistance additives that can be used either as a coating or filled with... more info
NEW
Color Chips HPU-MC 700 VOC - Moisture Cure Urethane (500+ sq/ft)

Color Chips HPU-MC 700 VOC - Moisture Cure Urethane (500+ sq/ft)

HPU-MC 700 VOC is a one component moisture cured polyurethane (HDI based) floor coating/sealer that exhibits superior characteristics for abrasion... more info
NEW
Color Chips HWU 420 High Wear Urethane Clearcoat kit (600 sq/ft) 1 gal

Color Chips HWU 420 High Wear Urethane Clearcoat kit (600 sq/ft) 1 gal

    HWU 420 is a three component aliphatic urethane floor finish that exhibits excellent characteristics for abrasion resistance, chemical... more info
NEW
Devoe Devthane 379 Clear Urethane 1 gal kit

Devoe Devthane 379 Clear Urethane 1 gal kit

Devoe Devthane 379 Clear 1 Gallon Kit   A high performance, two-component chemically-cured aliphatic urethane gloss finish. For use on properly... more info
HOT